Savustintukku stands for: Great grills and awesome sauces

Binchotan White Konia 7kg

Binchotan White Konia 7kg

In stock

Product description

BBQ Flavour Binchotan White Konia burns at a constant temperature and does not produce smoke or splatter. It has a long burn time, averaging
5 hours. This Binchotan has a carbon percentage of 96-98%. The charcoal bed can reach a temperature of 1000 to 1100°C

BBQ Flavour Binchotan White Konia 7kg

Compared to Marabu charcoal, Binchotan is much quieter. It doesn't crackle and is completely odorless and smokeless when you light it. It burns much longer than Marabu and also achieves a higher temperature. Therefore, no chemicals were added during the traditional production process. The ash content is about 1.8%. Binchotan is a type of charcoal with an unearthly high carbon percentage, which makes for an almost pure composition. And you can taste that. Binchotan is made in Japan in a wonderful traditional way, in kilns made of stone and clay. The burning of this charcoal requires such great expertise that there is a separate profession for it: Binchotan burner. Producing Binchotan to Japanese quality standards is very difficult, but certainly not impossible. Above all, it takes a long time. One cycle of making about four hundred kilos of Binchotan takes no less than 15 days. That cycle starts with collecting wood and ends with packing it into boxes. The collected wood is first carefully placed in the kiln and heated at about 200 °C for about ten days with minimal oxygen supply. The minimal oxygen supply ensures that the wood does not burn but decomposes. Because so little oxygen is supplied, an almost completely pure carbon composition is formed. When the smoke coming from the kiln is just the right color, the wood has decomposed and the oxygen supply is increased. The kiln reaches a temperature of no less than 1000 °C . This process stops as soon as the charcoal gets a red glow. The final step is to roll the charcoal in ash and sand, giving it its characteristic gray glow. After all, it's not called White Binchotan for nothing. The end result is Binchotan, with a wonderful carbon percentage of no less than about 95%. The best way to get Binchotan to burn is to first make a softer charcoal bed with, for example, Acacia charcoal. You then place the Binchotan diagonally on the hot charcoal bed. This way you can easily light Binchotan. It is also possible to light Binchotan with a gas burner, which takes about 15 minutes to do.

If you notice any cracking or popping sounds you need to dry out the charcoal first. This is because binchotan absorbs moisture from the air. Any moisture inside the charcoal will expand on heating causing cracking sounds/spitting. To dry out A) place in the sun or B) If you want to use straight away, put it on low heat for approximately 10+ minutes. After drying out you can increase the temperature.

Shipping costs

DB Schenker pick up parcel for parcels including charcoal, Finland only
10,90 €
Pick-up point: Please select from the list.
Pick up from store (at Tuusula)
0,00 €
Pallet (freight) Helsinki Vantaa Espoo
49,00 €
Pallet (freight)
79,00 €
Heavy shipments to arcipelago or northest Finland
199,00 €















Gift card